unit: mm 1: anode 2: cathode 273 p d (mw) i f (ma) i fp (ma) * v r (v) t opr ( c) t stg ( c) lighting color red green amber orange 60 60 60 60 20 20 20 20 100 100 100 100 4 4 4 3 - 25 ~ + 80 - 30 ~ + 85 surface lighting 15.0 mm 12.0 mm series n absolute maximum ratings (t a = 25 c) conventional part no. global prat no. lighting color ln0401rp2 lnv204101a red ln0401gp3 LNV304101A green ln0401yp4 lnv404101a amber ln0401rp8 lnv804101a orange pulse width 1 msec. the condition of i fp is duty 10%, pulse width 1 msec - 25 ~ + 80 - 30 ~ + 85 - 25 ~ + 80 - 30 ~ + 85 - 25 ~ + 80 - 30 ~ + 85 ln0401rp2 ln0401gp3 ln0401yp4 ln0401rp8 unit red green amber orange - red diffused green diffused amber diffused red diffused - 4.0 1.2 10 2.2 2.8 700 100 20 10 4 8.0 2.5 10 2.2 2.8 565 30 20 10 4 6.0 2.0 10 2.2 2.8 590 30 20 10 4 8.0 2.5 10 2.1 2.8 630 40 20 10 3 mcd mcd ma v v nm nm ma m av n electro - optical characteristics (t a = 25 c) conventional part no. lighting color lens color i o v f typ min typ i f max typ typ i f max v r l p dl i r 9.7 0.38 0.5 2 1 2 1 2 1 2 1 16.0 0.3 15.0 0.25 5.08 5.08 2.54 2.54 0.7 7.0 0.3 0.5 2.5 3.5 min. 1.7 max. not soldered 0.8 13.0 0.3 12.0 0.25 5.0 2.0 0.3 i o ? t a 500 300 100 10 ambient temperature 0 - 20 80 100 60 40 20 1.6 1.8 2.0 2.4 2.2 3 1 5 10 50 100 30 100 50 30 5 3 10 1 100 50 30 5 3 10 1 forward current directive characteristics luminous intensity forward current relative luminous intensity ambient temperature wavelength i f ? v f 20 30 40 50 10 0 60 70 80 90 90 80 20 30 40 50 10 60 70 80 20 40 60 0 20 10 5 15 20 25 40 60 80 100 100 600 500 700 800 80 60 40 20 0 i f ? t a forward voltage relative luminous intensity wavelength characteristics relative luminous intensity forward current i o ? i f 30 0 50 lno401rp8 lno401rp8 lno401rp8 lno401gp3 lno401gp3 lno401gp3 lno401yp4 lno401yp4 ln o 401r p2 ln o 401r p2 lno401rp2 ln o 401r p2 ln o 401rp8 lno401rp8 ln o 401rp8 lno401yp4 lno401yp4 lno401yp4 lno401rp2 lno401rp2 lno401rp2 lno401gp3 lno401gp3 lno401rp2 lno401rp2 lno401rp8 lno401rp8 lno401gp3 lno401gp3 lno401yp4 lno401yp4 lno401yp4 lno401gp3 lno401gp3 lno401gp3 lno401rp8 lno401rp8 lno401rp8 lno401yp4 lno401yp4 lno401yp4 lno401rp2 lno401rp2 lno401rp2 0 20406080100 20 40 60 80 100 relative luminous intensity
caution for safety danger please read the following notes before using the datasheets a. these materials are intended as a reference to assist customers with the selection of panasonic semiconduc- tor products best suited to their applications. due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. b. panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. therefore, panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. c. these materials are solely intended for a customer's individual use. therefore, without the prior written approval of panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the internet or in any other way, is prohibited. request for your special attention and precautions in using the technical information and semiconductors described in this material (1) an export permit needs to be obtained from the competent authorities of the japanese government if any of the products or technologies described in this material and controlled under the "foreign exchange and foreign trade law" is to be exported or taken out of japan. (2) the technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. it does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) the products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household ap- pliances). consult our sales staff in advance for information on the following applications: ? special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. ? any applications other than the standard applications intended. (4) the products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. at the final stage of your design, purchasing, or use of the prod- ucts, therefore, ask for the most up-to-date product standards in advance to make sure that the latest specifi- cations satisfy your requirements. (5) when designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. otherwise, we will not be liable for any defect which may arise later in your equipment. even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) when using products for which dry packing is required, observe the conditions (including shelf life and after- unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) no part of this material may be reprinted or reproduced by any means without written permission from our company. gallium arsenide material (gaas) is used in this product. therefore, do not burn, destroy, cut, crush, or chemi- cally decompose the product, since gallium arsenide material in powder or vapor form is harmful to human health. observe the relevant laws and regulations when dispos- ing of the products. do not mix them with ordinary in- dustrial waste or household refuse when disposing of gaas-containing products. 2001 mar
|
